Sorbitol Project IntroductionThe dissolving tank is used to dissolve commercial starch, which is added and mixed with water. Before entering the automatic liquefaction system, the starch milk is detected online and controlled in the slurry mixing tank to correct for DS, PH value, and enzyme amount.
Sorbitol Project IntroductionStarch milk adjustment: The DS=28-32%, PH, and temperature of starch milk from the starch workshop are adjusted. Alternately, combine dry starch and water, then make adjustments to obtain the aforementioned conditions in the following step. Liquefaction: With the help of
Sorbitol Project IntroductionThe dissolving tank receives the commercial starch, which is then added water to dissolve. After that, the starch milk enters a slurry mixing tank where its DS, PH value, and enzyme content are adjusted by online detection and control before moving on to an automatic liq
Sorbitol Project Introduction Starch milk adjustment: Starch milk from starch workshop is adjusted to DS=28-32%, appropriate PH and temp. Or mix the dry starch and water, then adjust to reach the above conditions into the next section.Liquefaction: Starch milk is liqueficated with the jet cooker and